Your Pet GPS uses LED lights and audio cues, known as Tunes, to communicate different statuses. This guide will help you understand what these mean on your Pet GPS.
LED Patterns
Solid
A solid LED indicates a full charge when connected to a charging cable. If the Pet GPS is not charging, pressing the button on top of the device will also turn the light on.
Slow Pulse
A slow-pulsing LED pattern indicates that the device is charging. You should see this LED pattern when your device is connected to the charging cable.
4-5 Blinks
A quick blinking pattern (4-5 blinks) means the device was reset successfully.
3 Blinks with a Pause
A 3-blink LED pattern means the device has encountered an error.
Tunes
Activation Tune
This tune plays when the button on the top of the Pet GPS is pressed once during activation.
Connection Successful Tune
This tune plays when the Pet GPS has successfully established a bluetooth connection and is ready to be activated.
Ring to Find Tune
This tune plays when you tap the Ring button in the app.
Reset/Sleep Tune
This tune plays when the Pet GPS has been woken up, but not activated, so it returns to a sleep mode. This tune also plays when a Pet GPS has been deactivated.
Error Tune
This tune plays when the device has encountered an error.